3
Belkin
®
Universal 2nd Gen Secure DP/HDMI to DP/HDMI KVM Switch
InTroduCTIon
seCTIons
Table of Contents
seCTIons
user Guidance & Precautions
Please read the following User Guidance & Precautions carefully before using
the product:
1.
By default, after product power-up, the active channel is #1.
2.
The appropriate usage of peripherals (e.g., keyboard, mouse, display, authentication
device) is described in detail in this User Manual’s appropriate sections. Do not
connect any authentication device with an external power source to product.
3.
For security reasons products do not support wireless keyboards and mice. In any
case do not connect wireless keyboard/mouse to product.
4. For security reasons products do not support microphone/line-in audio input. In any
case do not connect a microphone to product audio output port, including headsets.
5.
Product is equipped with an always-on active anti-tampering system. Any attempt
to open product enclosure will activate the anti-tamper system indicated by all
channel-select LEDs flashing continuously. In this case, product will be inoperable
and warranty void. If product enclosure appears disrupted or if all channel- select
LEDs flash continuously, please remove product from service immediately and
contact technical support.
6. Connecting external USB devices to product CAC port (if equipped):
a. When connecting a USB device that is not qualified or rejected for
security reasons to product’s CAC port, the CAC LED will flash green and
USB device will be inoperable.
b. When connecting a USB device that is undetectable for any reason (e.g. failed
device, non-standard device etc.) to product’s CAC port, the CAC LED will not
illuminate at all and device will be inoperable.
7.
Do not connect product to computing devices:
a. That include telecommunication equipment;
b. That include frame grabber video cards;
c.
That include special audio processing cards.
8. Product has a remote control port in the back panel labeled “Remote”
9.
Important!
Before re-allocating computers to channels, it is mandatory to
power cycle product, keeping it powered OFF for more than 1 minute.
10. Product log access and administrator configuration options are described in
product Administrator Guide.
11. If you are aware of any potential security vulnerability while installing or operating
product, please remove product from service immediately and contact us in one of
the ways listed in this manual.
