Technical Specifications
Continuous Duty Electrical Rating: 120V~/15A/60Hz/1800W
Maximum Energy Dissipation: 1080 Joules
.
H-N: 360 Joules
.
H-G: 360 Joules
.
N-G: 360 Joules
Maximum Spike Current: 72,000A
.
H-N: 24,000A
.
H-G: 24,000A
.
N-G: 24,000A
UL Clamping Voltage (3-line): UL 1449 400V
EMI/RFI Noise Filtration: 150kHz–100MHz up to 58 dB
Remote Switch Battery Type: A23 (12V) alkaline or equivalent
UL Listed to U.S. and Canada Safety Standards: UL 1449, UL 1363
The EMI/RFI components evaluated to the applicable requirements
with UL 1283
Safety Information
.
To reduce the risk of electrical shock, unplug the unit and allow it to
cool before cleaning.
.
Do not “daisy-chain” this product or use it with extension cords. The
Belkin Conserve Switch’s power cord must be plugged directly into
an AC power source to ensure proper surge protection.
.
For indoor use and in dry locations only. Not for use with aquariums
or other water-related products.
FCC ID: K7S-BG200001
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
.
Reorient or relocate the receiving antenna.
.
Increase the separation between the equipment and receiver.
.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
.
Consult the dealer or an experienced radio/TV technician
for help.
Limited One (1) Year Warranty
What this warranty covers.
Belkin International, Inc., warrants to the original purchaser of
this Belkin Conserve Switch, that the Conserve Switch shall be
free of defects in design, assembly, material, or workmanship.
What the period of coverage is.
Belkin International, Inc., warrants the Belkin Conserve Switch
for one (1) year from the original date of purchase.
What will we do to correct problems?
Conserve Switch Warranty.
Belkin will repair or replace, at its
option, any defective Conserve Switch free of charge (except
for shipping charges for the Conserve Switch). Belkin reserves
the right to discontinue any of its products without notice, and
disclaims any limited warranty to repair or replace any such
discontinued products. In the event that Belkin is
repair or replace the Conserve Switch (for example, because
it has been discontinued), Belkin will offer either a refund or
a credit toward the purchase of another product from Belkin.
com in an amount equal to the purchase price of the Conserve
Switch as evidenced on the original purchase receipt and as
discounted by its natural use.
What is not covered by this warranty?
All above warranties are null and void if the Belkin Conserve
Switch is not provided to Belkin International, Inc., for
inspection upon Belkin’s request at the sole expense of the
purchaser, or if Belkin International, Inc., determines that the
Belkin Conserve Switch has been improperly installed, altered
in any way, or tampered with. The Belkin Conserve Switch
Warranty does not protect against acts of God (including but
not limited to flood, earthquake, war, and vandalism), theft,
normal-use wear and tear, erosion, depletion, obsolescence,
abuse, or alteration.
How to get service.
To get service for your Belkin Conserve Switch, you must take
the following steps:
1.
Contact Belkin International, Inc., at 12045 E. Waterfront
Drive, Playa Vista, CA 90094, Attn: Customer Service, or
call (800)-223-5546. Be prepared to provide the following
information:
a.
The part number of the Belkin Conserve Switch.
b.
Where you purchased the Conserve Switch.
c.
When you purchased the Conserve Switch.
d.
Copy of original receipt.
2.
Your Belkin Customer Service Representative will then
instruct you on how to forward your receipt and Belkin
Conserve Switch and how to proceed with your claim.
Belkin International, Inc., reserves the right to review the
damaged Belkin Conserve Switch. All costs of shipping the
Belkin Conserve Switch to Belkin International, Inc., for
