o p e r at i n g i n st r u ct i o n s
ZtH-piccV
The ZTH-PICCV is a tool created to easily
adapt the flow settings for the PICCV in the field.
It directly connects to the Belimo actuator.
Belimo AirControls(USA), Inc.
•
203.791.9915
•
www.belimo.com
Technical Information
Supply
24 VAC/DC
Communication
PP
Used with actuator types
LRX24-MFT
TF24-MFT US
LF24-MFT US
ARX24-MFT
AF24-MFT
GMX24-MFT
ZTH-PICCV
1
2
3
Y
U
5
ImporTanT:
There are two ways to connect the tool to the actuators
Lr, ar, Gm Series
Use the interface on the top of the
actuator. (Leave all of the wires of
the actuator installed.)
TF, LF, aF Series
Connect to the installed wires of
the actuator. (Leave all of the wires
of the actuator installed.)
Re-PRoGRAMMInG PRoCeSS:
Step 1
Connect cable to actuator port, twist to lock in place (or wire as above).
Will display actuator for 5 seconds – note this and compare to actuator
being connected.
Step 2
Start pICCV proCESS press ok
will be displayed. Press ok.
continued on other side
71
00
9-
0000
1
LRX24-MFT
sTaRT piccv
pRocess press ok
WT
bl
Tq
