Belimo UK24BAC, Технические данные инструкция

Страница: 16 / 20

UK24BAC Belimo Gateway MP to BACnet MS/TP
16 / 20 T9-
UK24BAC • en • v1.9 • 06.2018 • Subject to changes
www.belimo.com
Version overview
Firmware V1.10 New functions/modifications:

The disengaged gear is represented on the objects ACT_VALUE_[n] and ABS_POS_[n]
using the Status-Flags (OVERRIDDEN) and now also in the property Reliability.

Changes of the Status-Flags generate COV-Notifications (if enabled)

Handling of network priorities corrected

Increased MS/TP communication quality on MS/TP
Known issues:

–
Firmware V1.09
New functions/modifications:

The disengaged gear is represented on the objects ACT_VALUE_[n] and ABS_POS_[n]
using the Status-Flags (OVERRIDDEN)
Known issues:

–
Firmware V1.08 New functions/modifications:

OFFSET_DEV_ID Setting adjusted to
0…4'194'056 (2
22
-247)

New functional profile "MPL actuator" supported (e.g. CQ24A-MPL)

Integrated sensor conversion


°C for PT1000, NI1000 and NTC5K

Nominal volumetric flow (VAV/EPIV) as BACnet Object available

MP addressing function reworked
Known issues:

–
Firmware V1.07
New functions/modifications:

WritePropertyMultiple service supported

Feedback values are rounded

Unconfirmed-COV-Notification for Multi-state Value fixed (wrong datatype)

PropertyIdentifier for COV_Increment fixed (wrong ID)

Sending of malformed packets fixed (in relation with WhoIs requests)

Instability on high baudrate (76.8k) resolved
Known issues:

–
Firmware V1.06 New functions/modifications:

Unsolicited-COV-Reporting for volumetric flow added

Engineering units (position/volumetric flow/pressure) is updated (if supported by actuator)

Instability on high bus load resolved
Known issues:

WritePropertyMultiple service not supported
Firmware V1.03 New functions/modifications:

Property State_Text changed to BACnetARRAY

Property Description in SUM_FAULT object with bit field (internal state) completed

Unsolicited-COV-Reporting supported (see known issues)

Absolute position ABS_POS_[n] calculated
Known issues:

WritePropertyMultiple service not supported

Engineering units (position and volumetric flow) not for all actuator types updated

Unsolicited-COV-Reporting for volumetric flow not supported