BELGACOM Twist 608, Руководство пользователя, Страница: 31 / 52

30
Using several handsets
Twist 608 / Belgacom EN / A31008-M1905-E151-1-2M19 / registr_sett.fm / 14.10.08
Ve
rs
ion 4,
16
.09.
2005
Using several handsets
Registering handsets
You can register up to six handsets to your
base station.
Automatic registration to Twist 608/
Precondition: The handset must not
already be registered to a base station.
Registering the handset to the base sta-
tion occurs automatically.
¤
Place the handset in the base station
with its display facing forward.
Registration can take up to 5 minutes.
While this is happening,
Regstr.Procedure
appears in the display and the name of the
base station flashes. When the handset
has registered, its screen displays its inter-
nal number, e.g.
INT 2
for internal number
2. The handset is assigned the lowest
available internal number (1–6). If all
internal numbers 1–6 have been
assigned, number 6 is overwritten, pro-
vided the handset with the internal
number 6 is in idle status.
Manual registration to Twist 608/
You must activate manual registration of
the handset on both the handset and the
base station.
Once it has been registered, the handset
returns to idle status. The handset's inter-
nal number is shown in the display e.g.
INT 1 . If not, repeat the procedure.
On the handset
v
¢
Ð
¢
Handset
¢
Register H/Set
~
Enter the system PIN of the
base station (the default is
0000) and press
§OK§
. Base 1
flashes in the display.
On the base station
Within 60 sec. press and hold the registra-
tion/paging key on the base station
(page 1) (approx. 3 sec.).
Registering other handsets
You can register other handsets and hand-
sets for other devices with GAP functional-
ity as follows.
On the handset
¤
Start to register the handset as
described in its user guide.
On the base station
Press and hold the registration/paging key
on the base station (page 1) (approx. 3
sec.).
Please note:
– Automatic registration is not possible when
the base station to which you wish to regis-
ter the handset is being used to make a call.
– Each key press interrupts the automatic
registration.
– If automatic registration does not work,
you will have to register the handset manu-
ally.
– You can change the name of the handset
(page 33).