9
First steps
Twist 608 / Belgacom EN / A31008-M1905-E151-1-2M19 / starting_PTT.fm / 14.10.08
Ve
rs
ion 4,
16
.09.
2005
Please note:
u
Always repeat the charging and dis-
charging procedure if you remove the
batteries from the handset and reinsert
them.
u
The batteries may warm up during
charging. This is not dangerous.
u
After a while the charge capacity of the
batteries will decrease for technical rea-
sons.
Setting the date and time
Set the date and time so that the correct
date and time can be assigned to incom-
ing calls, and so that the alarm can be
used.
¤
If you have not yet set the date and
time, press the display key
§Time§
to open
the input field.
To change the time, open the input field
with:
v
¢
Ð
¢
Date/Time
¤
Change multiple line input:
Date:
Enter day, month and year in 6-digit
format.
Time:
Enter hours and minutes as 4 digits,
e.g.
Q M
5
for 07:15
a.m.
§Save§
Press the display key
Display in idle status
Once the phone is registered and the time
set, the idle display is as shown here
(example)
Your phone is now ready for use.
If you have any queries about using your
phone, please read the tips on trouble-
shooting ("Questions and answers",
page 41) or contact our customer service
department (Customer Care, page 44).
Please note:
After the first battery charge
and
discharge
you may replace your handset in its base sta-
tion after every call.
Ð
V
INT 1
15.11.07
07:15
INT
SMS