Belden Miranda NV9640A Скачать руководство пользователя страница 71 | Manualshive

Страница: 71 / 112

background image

61

NV9640A

User’s Guide

Navigate

A navigate button displays and activates one of the button pages defined in the panel configu-
ration. We call that the “target” button page.

The target page can be an ordinary button page (defined during configuration) or it can be the
first page of a list. Lists are characterized by “back” and “forward” buttons on the panel. Such
lists can be categories (source or destination), sources, destinations, or salvos.

Navigate buttons have no specific default text and it is the configurer’s job to provide text that is
meaningful. The text should help identify the contents of the target page.

Just press the navigate button to access the target page.

Other kinds of buttons can cause the display of a target page. These include ‘Global Navigate’
buttons and category buttons. In practice, navigate buttons, global navigate buttons, and cate-
gory buttons are nearly indistinguishable, although the pages they display can be quite
different.

See the

button type.

Global Navigate

A ‘Global Navigate’ button functions the same way a navigate button does. Global navigate
buttons exist mainly for the convenience of the configurer. Operators should rarely notice any
difference between global navigation buttons and other navigation buttons.

Global navigate buttons, however, can access only static button pages. They do not access list
pages. That is because configurers have no list options for global navigate buttons.

Page Down

This button scrolls a list of levels in X-Y mode or a list of MD devices in MD mode. There are 3
options for scrolling:

1 Scrolling the display only. The items on the selection buttons do not scroll.

2 Scrolling the selection buttons only. The items on the display do not scroll.

3 Scrolling both the display and the selection buttons at the same time. This behavior can

occur only when the panel has no ‘VFD/SEL Toggle’ button.

If the panel has a ‘VFD/SEL Toggle’ button, you can switch between options 1 and 2. The button
will read either “Paging VFD” or “Paging Sel Buttons.”

When you scroll the selection buttons, they scroll modulo the number of buttons. For instance, if
there are 9 buttons, they scroll in groups of 9 items.

This button scrolls the list

down

. The ‘Page Down’ button becomes enabled when it is possible

to scroll down and is disabled when it is not possible.

The default button text is “Page Down” but the button can have any legend.

Page Up

This button scrolls a list of levels in X-Y mode or a list of MD devices in MD mode. There are 3
options for scrolling:

1 Scrolling the display only. The items on the selection buttons do not scroll.

2 Scrolling the selection buttons only. The items on the display do not scroll.

«
...
69
70
71
72
73
...
»

Содержание Miranda NV9640A

















































































































Отзывы:

Нет отзывов

Похожие инструкции для Miranda NV9640A

Бренд: Zetkama Страницы: 6

Бренд: Facility Explorer Страницы: 4

Бренд: Campbell Страницы: 3

Бренд: Eaton Страницы: 100

Бренд: GBD Страницы: 15

Бренд: Ultratec Страницы: 33

Бренд: Zeta Страницы: 44

Бренд: Wang Страницы: 68

Бренд: NAVITAS Страницы: 14

Бренд: brel-motors Страницы: 2

Бренд: Hunter Страницы: 2

Бренд: Tektronix Страницы: 112

Бренд: Bettis Страницы: 18

Бренд: EisSound Страницы: 10

Бренд: Rain Bird Страницы: 48

Бренд: Sullair Страницы: 31

PersonalWorkplace Pro Video

Бренд: G&D Страницы: 56

Бренд: Beninca Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды