Belden Miranda NV9640A Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 112

background image

ii

Copyright © 2013 by Miranda Technologies

All rights reserved. No part of this manual may be reproduced in any form by photocopy,
microfilm, xerography or any other means, or incorporated into any information retrieval
system, electronic or mechanical, without the written permission of Miranda Technologies,
Inc..

• Document Revision: 1.1

• Document Part Number: UG0072-01

• Software Version: 6.3.0

Change History

Notice

Due to continued product development, the accuracy of the information in this document
may change without notice. The information and intellectual property contained herein is
confidential between Miranda and the client and remains the exclusive property of Miranda.
If you find any problems in the documentation, please report them to us in writing. Miranda
does not warrant that this document is error-free.

All title and copyrights as well as trade secret, patent and other proprietary rights in and to
the Software Product (including but not limited to any images, photographs, animations,
video, audio, music, test, and “applets” incorporated into the Software Product), the
accompanying printed materials, and any copies of the Software Product, are owned by
Miranda Technologies, Inc. The Software Product is protected by copyright laws and
international treaty provisions. Customer shall not copy the printed materials accompanying
the software product.

The software contains proprietary information of Miranda Technologies, Inc. It is provided
under a license agreement containing restrictions on use and disclosure and is also
protected by copyright law. Reverse engineering of the software is prohibited.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.

Rev.

Date

ECO

Description

Approved

1.0

26 Jul 11

TBD

Initial release. This document started as a copy of
UG0048, the NV9640 User’s Guide.

D. Cox

1.1

02 May 13

TBD

Reformatted. D.Cox

«
1
2
3
4
...
»

Содержание Miranda NV9640A

















































































































Отзывы:

Нет отзывов

Похожие инструкции для Miranda NV9640A

Бренд: Vacon Страницы: 62

Бренд: Samson Страницы: 78

Бренд: Rachio Страницы: 16

Бренд: Zolix Instruments Страницы: 22

Бренд: Handicare Страницы: 56

Бренд: Ohsung Electronics Страницы: 18

Бренд: Febco Страницы: 12

Бренд: HANYOUNG NUX Страницы: 36

Бренд: HANYOUNG NUX Страницы: 4

Бренд: MADRIX Страницы: 91

Бренд: MADRIX Страницы: 36

Бренд: MADRIX Страницы: 40

Бренд: YASKAWA Страницы: 18

Бренд: IFM Страницы: 49

Бренд: Kelly Страницы: 37

XDOM TAKE 6 IR/RF - PRODUCTSHEET

Бренд: Ebode Страницы: 88

Бренд: Lab-T Страницы: 7

Powador XP Series

Бренд: Kaco Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды