Belden Miranda KMV-3901, Быстрый старт

Страница: 17 / 27

13
KMV-3901/3911
Quick Start Guide
Finding the System IP Address and Application Version
To find the system IP address and application version
1 Press the Select button on the front edge of the KMV-3901/3911 card.
The Status LED on the selected card flashes orange, and the associated control menu
appears on the display of the Densité frame’s local control panel.
2 On the local control panel, press the [–] button.
The version of the Kaleido-X Software that is running on the card (e.g. “5.00-build.21”)
appears on the display.
3 On the local control panel, press the [–] button repeatedly until NETWORK SETTINGS
appears on the display, and then press the SEL button:
IP ADDRESS EDIT appears on the control panel’s display.
4 Press the SEL button again.
The current IP address appears on the display.
5 Press the Select button on the front edge of the KMV-3901/3911 card to exit the control
menu.
Using the Kaleido-RCP2 with Default Settings
Select button
Status LED
Boot LED,
Power LED,
CPU Status LED (other side of board)
SDI LEDs
USB connector (other side of board)
Note:
The Kaleido-RCP2 unit is optional and is not included in the standard
KMV-3901/3911 package.