Belden lumberg automation 934 878-001 Скачать руководство пользователя страница 28

Страница: 28 / 75

5.2 Configuration of LioN-P

PROFINET Modules in TIA Portal

5 Configuration and Startup

5.2.2 Assigning Device Name to a LioN-P Module

To enable a participant to be assigned an IP address in a PROFINET network,

each LioN-P module has to be issued with a device name. A participant

search enables the detected PROFINET devices to be displayed.
The LioN-P modules are assigned MAC addresses when they are shipped.

These are unique and cannot be changed by the user. The first MAC address

is depicted on the housing of the LioN-P module. This can be used to locate

every device in the list of reachable participants and to assign a device name

in each instance.
Connect the LioN-P module to the PROFINET network.
In the device summary for the LioN-P module, select slot 0 and in the main

Online

Assign device name

open the

Assign PROFINET device name

dialog.

If the LioN-P module does not appear in the list of reachable participants in

the network, you can change the device filter and then update the list. If the

device still fails to appear, check your firewall settings.
Select a detected LioN-P module and assign it to the selected PROFINET

device name. If the device name was successfully assigned, this is indicated

by the status.

Technical Manual LioN-P PROFINET

Version 2.0 10/2017

Содержание lumberg automation 934 878-001












































































Результаты поиска

Содержание lumberg automation 934 878-001

Отзывы:

Похожие инструкции для lumberg automation 934 878-001

Бренды по названию

Популярные бренды

Belden lumberg automation 934 878-001, Техническое руководство

Результаты поиска

Содержание lumberg automation 934 878-001

Отзывы:

Похожие инструкции для lumberg automation 934 878-001

Бренды по названию

Популярные бренды