Basic Information
1.4 This Manual Describes
For cellular IPv6 connection see
Mobile WAN Configuration
in Chapter
. For IPv6 LAN
configuration see
LAN Configuration
in Chapter
, DHCPv6 server/client is also supported.
IPv4 is the default, but IPv6 can be enabled or used with all features and protocols in the router,
except for non-secured tunnels GRE, L2TP and PPTP, and VRRP. Using the secured tunnels
OpenVPN and IPsec it is possible to run IPv6 traffic through an IPv4 tunnel and vice versa.
The configuration forms for
NAT
,
Firewall
and
Up/Down Scripts
are completely separate for the
IPv4 and IPv6 stacks. ICMPv6 protocol is also supported. IPv6 configuration is covered in each
following Chapter when possible.
1.4 This Manual Describes
Following areas are described in this manual:
•
Configuration of the router item by item according to the web interface (chapters
to
•
Configuration in typical situations examples (chapter
–
Access to the Internet from
(Local Area Network) via mobile network, hapter
–
Backed up access to the Internet (from
), chapter
–
Secure networks interconnection or using
(Virtal Private Network), chapter.
–
Serial Gateway (connection of serial devices to the Internet), chapter
UM Configuration OWL LTE M12
Rel. 06.1.09 - 07/2019
13