Typical Situations
7.2 Backup Access to the Internet from LAN
Figure 90: Backup access to the Internet – Backup Routes configuration
You can verify the configured network interfaces in the
Status
section in the
Network
item.
You will see the active network interfaces: eth0 (connection to LAN), eth1 (wired connection
to the Internet) and usb0 (mobile connection to the Internet). IP addresses and other data are
included.
At the bottom of the page you will see the
Route Table
and corresponding changes if a wired
connection fails or a cable is disconnected the mobile connection will be used.
Backup routes work even if they are not activated in the
Backup Routes
item, but the router
will use the factory defaults.
138
UM Configuration OWL LTE M12
Rel. 06.1.09 - 07/2019
