Belden Hirschmann MICE MS20 Скачать руководство пользователя | Manualshive

Страница: 24 / 82

background image

24

Installation MS20/MS30

Release 13 09/2019

1.3

Description of the device variants

The industrial ETHERNET series MICE (Modular Industrial Communication
Equipment) consists of a basic switch module and the media modules. These
devices can be managed. A basic module contains all the functions of this
industrial Switch, with the exception of the interfaces to the LAN that is
connected. Pluggable media modules provide these interfaces. They differ
with regard to the number of interfaces and the media type for connecting
segments. An expansion module enables you to add 2 slots for media
modules to the basic module.

For the sake of simplicity, the basic switch module with various plugged in
media modules will be referred to as MICE in this document.



The MS20-... device variants are modular switches with up to 8, 16 or 24
* 10/100 Mbit/s Ethernet ports. You can choose the media for the ports via
the media modules.



The MS30-... device variants are modular switches with up to 8, 16 or 24
* 10/100 Mbit/s Ethernet ports and up to 2 additional Gigabit ports (1000
Mbit/s Ethernet). You can choose the media for the ports via the media
modules.

The basic module of the MS20/MS30 contains all the function units, such as:
switch function, management function, redundancy function, display control,
voltage connection, management connection, adjustable controls, slots for
media modules.

Family

Designed for

MS20

Larger numbers of ports, number of 100 Mbit ports desired, temperature range,
voltage range, certificates and software variant can be selected.

MS30

Larger numbers of ports and larger bandwidth requirement,
number of 100/1000 Mbit ports desired, temperature range, voltage range,
certificates and software variant can be selected.

«
...
22
23
24
25
26
...
»

Содержание Hirschmann MICE MS20



















































































Отзывы:

Нет отзывов

Похожие инструкции для Hirschmann MICE MS20

Бренд: echoflex Страницы: 8

Бренд: Cole Hersee Страницы: 2

Бренд: Dahua Страницы: 17

Бренд: Kramer Страницы: 17

Бренд: Comtrend Corporation Страницы: 2

Бренд: Velleman Страницы: 5

Бренд: Eaton Страницы: 120

Бренд: IPGARD Страницы: 2

START-LINE AGC-3500

Бренд: Trust Страницы: 16

Бренд: Versitron Страницы: 46

Бренд: Omega Страницы: 17

Бренд: Metra Electronics Страницы: 8

Бренд: IPGARD Страницы: 2

Evolution EVMX4442

Бренд: Vanco Страницы: 12

IPES/IES-5416T Series

Бренд: Lantech Страницы: 27

Бренд: BZB Gear Страницы: 27

AVS-OP-1616-567SD

Бренд: AMX Страницы: 1

GTB-MHDMI1.3-442

Бренд: Gefen Страницы: 29

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды