manualshive.com logo in svg

Belden Hirschmann MACH104-16TX-PoEP Series, Руководство пользователя, Страница: 33 / 48

Поделиться
Скачать
Belden Hirschmann MACH104-16TX-PoEP Series Скачать руководство пользователя страница 33

Installation MACH104-PoEP

Release 06 11/2013

33

4

Maintenance and service

When designing this device, Hirschmann largely avoided using wear 
parts. The parts subject to wear and tear are dimensioned to last longer 
than the lifetime of the product when it is operated normally. Operate this 
device according to the specifications 

(see on page 35 “Technical data”)

.

Relays are subject to natural wear. This wear depends on the frequency 
of the switching operations. Check the resistance of the closed relay 
contacts and the switching function depending on the frequency of the 
switching operations.

Hirschmann is continually working to improve and develop our software. 
You should regularly check whether there is a new version of the software 
that provides you with additional benefits. You will find software 
information and downloads on the product pages of the Hirschmann 
website.

Depending on the degree of pollution in the operating environment, check 
at regular intervals that the ventilation slots in the device are not 
obstructed.

Note: 

You will find information about the complaints and returns procedures 

in the Internet under 

http://www.beldensolutions.com/en/Service/Repairs/index.phtml

.

Содержание Hirschmann MACH104-16TX-PoEP Series

















































Отзывы:

Нет отзывов