Belden HIRSCHMANN HiOS-2A Скачать руководство пользователя страница 27

Страница: 27 / 66

Device security

2.5

Software update

UM Security BRS-2A

Release

8.7

05/2022

2.5

Software update

The following description applies to:



The initial software update for a device out-of-the-box



A software update as part of operation or maintenance

Check if an updated release of the device software is available. You find information and software

downloads on the Hirschmann product pages on the Internet at

www.hirschmann.com

. Then

decide which software release you want to run on your device.

Note:

To check the running software release on a device that does not yet have an IP configuration,

Hirschmann recommends using HiView.

To update the software on the device, you need management access to the device, which requires

at least a preliminary IP configuration. Hirschmann recommends using HiView to assign an IP

configuration to the device. HiView then offers you to open the device management.

At the first login with the default password, the device asks you to change the password. Use a

dedicated password according to your password policy

(see on page 19 “Plan a dedicated user

account password policy”)

Refer to the user manual "Configuration" for details on how to:



Determine the currently running software release



Determine the stored software release



Check for newer available software release

If you decide to update the device software:



Save the configuration profile in the volatile memory (

RAM

) to the non-volatile memory (

NVM

); see

the user manual "Configuration", chapter "Managing configuration profiles".



Back up the device configuration.



Update the device software; see the user manual "Configuration", chapter "Loading software

updates".



Reboot the device for the new software to take effect.

Note:

Hirschmann recommends checking for device software updates regularly and using the

latest available release. A newer release of the device software could provide you with security

improvements or benefits like new functions, including new security-related device functions.

Содержание HIRSCHMANN HiOS-2A



































































Результаты поиска

Содержание HIRSCHMANN HiOS-2A

Отзывы:

Похожие инструкции для HIRSCHMANN HiOS-2A

Бренды по названию

Популярные бренды

Belden HIRSCHMANN HiOS-2A, Руководство пользователя

Результаты поиска

Содержание HIRSCHMANN HiOS-2A

Отзывы:

Похожие инструкции для HIRSCHMANN HiOS-2A

Бренды по названию

Популярные бренды