Belden Hirschmann EAGLE20, Руководство пользователя

Страница: 38 / 60

38
Installation EAGLE20/30
Release 11 09/2020
2.7.2 100/1000 Mbit/s F/O port (optional)
Verify that you connect LH ports only with LH ports, SX ports only with SX
ports, and LX ports only with LX ports.

Connect the data cables according to your requirements.
See “Ethernet ports” on page 21.
2.7.3 WAN port (optional)
Note: In general, you should adhere to the following recommendations for
data cable connections in environments with high electrical interference
levels:

Provide copper cabling to ensure sufficient distance between the power
supply cables and data cables. Ideally, install the cables in separate cable
channels.

Use shielded cables.
2.8 Filling out the inscription label
The information field for the IP address helps you identify your device.