Installation DRAGON MACH Family
Release 04 02/2021
31
1.5.2
100/1000 Mbit/s F/O port
This port is an SFP slot.
The 100/1000 Mbit/s F/O port allows you to connect network components
according to the IEEE 802.3 100BASE-FX/1000BASE-SX/1000BASE-LX
standard.
This port supports:
1000 Mbit/s full duplex
100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
Delivery state:
100 Mbit/s full duplex when using a Fast Ethernet SFP transceiver
1000 Mbit/s full duplex when using a Gigabit Ethernet SFP transceiver
1.5.3
1/2.5/10 Gbit/s F/O port
This port is an SFP slot.
The port allows you to connect network components according to the
IEEE 802.3 (Clause 49) 10GBASE-R standard.
The port allows you to connect network components according to
IEEE P802.3bz 2.5 Gbit/s.
This port supports:
Full duplex mode
Delivery state:
1/2.5/10 Gbit/s full duplex when using a Gigabit Ethernet SFP transceiver
1.5.4
Support of PoE
Prerequisites for the support of PoE/PoE+:
At least 1 media module with PoE/PoE+ functionality (D4K-10TP-PoE) is
mounted in the basic device.
Note:
PoE/PoE+ is exclusively available with PoE-capable media modules.
The DRAGON basic device has no PoE-capable ports.
Note:
Connect only PoE-powered devices whose data connections are
located in the interior of the building and are specified as SELV circuits
according to IEC 60950-1 or ES1 circuits according to IEC/EN 62368-1.
The 10/100/1000 Mbit/s PoE port allows you to connect a network
component as a PoE power source according to standards IEEE 802.3
10BASE-T/100BASE-TX/1000BASE-T and IEEE 802.3bt.
The 10/100/1000 Mbit/s PoE port supports Class 0 ... Class 4 (PoE, PoE+)
according to IEEE 802.3bt.
The individual ports are not electrically insulated from each other (common
PoE voltage).
The PoE power is supplied via the wire pairs transmitting the signal (phantom
voltage).
Содержание Hirschmann DRAGON MACH Series
Страница 90: ......