Belden HIRSCHMANN BAT450-F, Руководство пользователя

Страница: 31 / 98

Installation BAT450-F
Release 12 07/2020
31
1.8.2 LS/DA
These LEDs display port-related information. During the boot phase, they
indicate the status of the boot process.
1.9 Display elements 11ac device variants (non-
LTE)
After the supply voltage is set up, the Software starts and initializes the
device. Afterwards, the device performs a self-test. During this process,
various LEDs light up.
1.9.1 Device state
These LEDs provide information about conditions which affect the operation
of the whole device.
WLAN 1, WLAN 2
Color
Activity Meaning
— off

No WLAN network specified

WLAN module deactivated
 WLAN module does not send any beacons
green flashing  At least one WLAN network defined
 WLAN module activated
green inverse flashing Number of flashes corresponds to number of connected
WLAN stations and P2P radio lines.
green flashing

DFS scanning or another scan procedure

Display of signal strength in client or P2P
red flashing Device has detected at least one hardware error.
LS/DA
Color
Activity Meaning
— off No network device connected
green lights up 1 Ethernet connection active
green/
yellow flashing Device is transmitting and/or receiving data
yellow lights up 2 Ethernet connections active
Power
WLAN 1 WLAN 2
LS/DA