4: Network Settings
UM Configuration BAT-C2
109
Release 01.0.00 04/2019
Configuring VPN Settings
You may edit or view VPN settings.
Using Web Manager
To view or configure VPN settings on the
Network
page, click
VPN
.
Using XML
Include in your file:
<configgroup name="vpn" instance="1">
Wi-Fi Protected Setup
Using Wi-Fi® protected setup (WPS), you have the option of connecting the BAT-C2 to a router or
access point in a single operation instead of manually creating a profile with a network name
(SSID), setting up wireless security parameters and updating the choice list. You may setup WPS
through pin or push button functionality through Web Manager.
Note:
Not all access points support Wi-Fi protected setup pin or Wi-Fi protected setup
push button.
Unreachable Host Detection
Host
Enter the unreachable detection host monitoring the connectivity with the
host on the remote network.
Ping Interval
Enter the Ping Interval to monitor connectivity with a host on the remote
network.
Max Tries
Enter the number of Max Tries for pinging the host before the VPN tunnel is
restarted.
Submit (button)
Click the
Submit
button to enter the settings. The
Submit
button appears
when new settings are entered.
WPS buttons
Description
WPS (PIN)
Click the
WPS (PIN)
button in Web Manager to setup WPS by pin and click
OK
in the confirmation popup which appears. A randomly generated pin will
appear on the screen. Enter this pin at the access point and point your
browser to the correct IP address.
WPS (PBC)
Click the
WPS (PBC)
button in Web Manager to setup WPS by push button,
click
OK
in the confirmation popup which appears, and the credentials are
passed to the BAT-C2 automatically. Then point your browser to the correct
IP address.
Note:
Make sure the WPS PBC is triggered on the
to utilize
this option.
Table 4-17 Wi-Fi Protected Setup
VPN Setting
Description
Table 4-16 VPN (continued)