Belden Grass Valley VF 7-100X, Руководство пользователя

Страница: 12 / 37

6
Installation
Attaching accessories
Attaching accessories
Sunhood
A short sunhood is supplied for outdoor use. To attach the sunhood to the viewfinder
proceed as follows:
1 Make sure that the viewfinder is mounted and that its position is fixed.
2 Lift the sunhood above the viewfinder and lower it until the hooked edges at the sides
touch the sides of the viewfinder.
3 Slide down the sunhood until the thumb screws are level with the holes in the
viewfinder.
4 Tighten both thumbscrews with your fingers until they are finger-tight.
hole
thumb
screw
hole
thumb
screw