Belden Grass valley T2 4K Series, Руководство по обслуживанию

Страница: 7 / 101

September 1, 2019 T2 4K Series Service Manual
7
Service Safety Summary
WARNING: The service instructions in this manual are intended for use by
qualified service personnel only. To avoid personal injury, do not perform any
servicing unless you are qualified to do so. Refer to all safety summaries before
performing service.
Do Not Service Alone
Do not perform internal service or adjustment of this product unless another person
capable of rendering first aid and resuscitation is present.
Disconnect Power
To avoid electric shock, disconnect the main power by means of the power cord or, if
provided, the power switch.
Use Care When Servicing With Power On
Dangerous voltages or currents may exist in this product. Disconnect power and
remove battery (if applicable) before removing protective panels, soldering, or
replacing components.
To avoid electric shock, do not touch exposed connections.
Certifications and Compliances
Canadian Certified Power Cords
Products that are relocated to other countries should use nationally certified power
cords and plugs to ensure safe operation of the product.
FCC Emission Control
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense. Changes or modifications not
expressly approved by Grass Valley can affect emission compliance and could void the
user’s authority to operate this equipment.
Canadian EMC Notice of Compliance
This digital apparatus does not exceed the Class A limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications.
This product must not be used in residential areas.
!