Belden Grass Valley NV9603, Руководство пользователя

Страница: 15 / 67

5
NV9603
User’s Guide
• Preset.
The ‘Preset’ field shows the source that is pending a take. After the take, this source
becomes the current source and appears in the ‘Status’ field.
• Destination.
The ‘Dest’ field shows the current destination.
The ‘Status’, ‘Preset’, and ‘Dest’ fields can show either names belonging to a name set or
system names depending on (1) the state of the ‘Name Set Toggle’ button (if the panel has
one), (2) the default name set (3) the existence of name sets in the NV9000 configuration.
Flags
When a destination is in breakaway, the ‘Source’ field indicates the breakaway with an
asterisk in its eighth character position.

The asterisk will obscure the last character of the source name if the name has 8
characters.
Modes of Operation
The NV9603 operates in X-Y mode.
Additional but secondary modes of panel operation are:
• Salvo mode — pressing a salvo button places the NV9603 in salvo mode where the
operator may select and execute a salvo from a salvo list.
• Setup mode — where the NV9603 is freshly powered up, but disconnected from the
network. In this mode, you can preset the NV9603’s panel ID and perform a few
diagnostic tasks.
• Menu mode — pressing a menu button places the NV9603 in “menu” mode. In menu
mode, the buttons lose their normal functions and become part of a menu that
changes as needed during menu operation.
When the panel is not in setup mode or menu mode, we say it is in normal mode .
Other NV9603 Functions
The NV9603 can be configured to perform the following additional functions:
• Previous source and free source.
• System salvos.
• Lock/protect/release for destinations.
• Multiple-level breakaways.
• Broadcast data routing.