Belden Grass Valley NV9000, Руководство пользователя

Страница: 59 / 87

49
NV9601
User’s Guide
 Note: a protect prevents others from routing to a destination; a lock prevents anyone —
even the user who issued the lock — from routing to the destination.
 You may lock a protected source, but you cannot change a locked source to a protected
source directly. You must first unlock it.
MD Mode
In MD mode, a protected device has a “P” next to it when it appears in the display.
To protect or unprotect an MD device, select the device and press a ‘Protect’ button.
X-Y Mode
In X-Y mode, you can protect the current destination on each of its levels or you can protect
a source on all levels. For destinations, select the level(s) and press the ‘Protect’ button to
perform the lock. For sources, just press the ‘Protect’ button.
Select protected levels and press the ‘Protect’ button to unprotect them. A protected level
has a “P” next to it when it appears in the display.
See Lock, Protect, and Release on page 41 .
Quick Source
A quick source button selects a source and performs an immediate take.
When you assign a quick source button, a drop-down menu appears in which you choose a
source device.
The ‘None’ entry is merely a placeholder. Do not choose ‘None’.
Salvo
This button causes the panel to enter salvo mode. In salvo mode, the display shows a list of
both system salvos and local salvos:
To execute a salvo, first choose one using the selection buttons. You might need to scroll
the display to see the salvo you want.
Salvo Setup 1 Salvo Setup 1
Execute SVO2 2 Execute SVO2 2
SVO3 3 SVO3 3
SVO4 4 SVO4 4
LSVO1 5 LSVO1 5
LSVO2 6 LSVO2 6
Salvo Setup 1 Salvo Setup 1
Execute SVO2 Execute SVO2
SVO2 SVO3 3 SVO2 SVO3 3
SVO4 4 SVO4 4
Press LSVO1 5 Press LSVO1 5
Take LSVO2 6 Take LSVO2 6
Selected
Salvo