Belden grass valley MV-840 Series Скачать руководство пользователя страница 33

Страница: 33 / 77

MV-841/851 User Manual

Introduction

Hardware Modules

Issue 1 Revision 1

Page 15

Introduction

The MV-841/851 Integrated Multiviewer module performs the function of:

•

2-off router output modules with expansion inputs; and

•

1-off multiviewer.

MV-841 or MV-851 module hardware primarily comprises:

•

Main front module.



See

MV-841-MB/MV-851-MB Multiviewer Front Module

on page 16.

•

Rear panel module.



See

MV-841/851 Multiviewer Rear Panel (MV-840-RP/MV-850-RP)

on page 20.

The hardware for an MV-841 or an MV-851 module is identical:

•

Hardware cards are identical.

•

Front modules are both marked on the card ejector with “MV841/51”.

•

Rear panel modules are both marked “MV840/50” on the silk screen.



(

Note:

These rear panels are also used on the MV-840 and MV-850.)

Figure 7

MV-841/851 Multiviewer Front and Rear Modules

Note:

MV-841 and MV-851 interchangeable:

Although there are different order codes for the integrated
multiviewer module for a Sirius 840 router (MV-841-xx) and for a
Sirius 850 router (MV-851-xx), the modules are actually identical
and interchangeable.

Rear Module

Front Module

Card ejector

Содержание grass valley MV-840 Series














































































Результаты поиска

Содержание grass valley MV-840 Series

Отзывы:

Похожие инструкции для grass valley MV-840 Series

Бренды по названию

Популярные бренды

Belden grass valley MV-840 Series, Руководство пользователя

Результаты поиска

Содержание grass valley MV-840 Series

Отзывы:

Похожие инструкции для grass valley MV-840 Series

Бренды по названию

Популярные бренды