38
Hardware Installation
Router Module Type and Input/Output Port Type
Router Module Type and Input/Output Port Type
The MV-831 is a double-width module, occupying one input slot and one output slot in a Sirius
830 router frame. The router controller configuration of the hosting router must be modified
for each MV-831 fitted:
Router Controller Configuration Items
, on page 63, lists the types etc to use in a router
controller configuration.
Fitting of Video SFPs to MV-831 Rear Panel
Fitting of SFPs can be done before or after an MV-831 Rear Panel (MV-830-RP) is fitted into a
router frame.
This sub-section provides SFP video module fitting guidelines.
Before inserting the SFP modules, take notice of the required SFP orientation for fitting into the
SFP cages of the MV-831 Rear Panel, as shown in Figure 3-3.
WARNING
Handle and fit the MV-830-RP Rear Panel with care;
it has some sharp, pointed locating pins.
Fig. 3-1: Coax and fiber SFP video modules
Fig. 3-2: MV-831 Rear Panel (shown in a horizontal orientation)
MV-831 Rear Panel Removal
Handles
SFP cages
WARNING:
Handle with care, pointed locating pins.
MV-830-RP
Note:
The normal orientation of the MV-831 Rear Panel in the router is vertical.
