12
Product Overview
MV-831 Default Monitoring Mode (24 Outputs and 24 Inputs)
MV-831 Default Monitoring Mode (24 Outputs and 24 Inputs)
In a Sirius 830 with only a single video crosspoint card, there is one MV-831 multiviewer
monitoring mode. This mode is also the default mode used in a Sirius 830 with two video
crosspoint cards fitted; this default mode is used before any router configuration setting
changes are made for the MV-831.
In this monitoring mode, MV-831 module’s router outputs are mapped to the first 24
multiviewer inputs; the module’s router inputs are mapped to the next 24 multiviewer inputs.
See Figure 1-6 and Table 1-4.
Figure 1-7 shows an example video wall layout for the default monitoring mode: 24 router
outputs at multiviewer inputs 1 to 24, and 24 router inputs at multiviewer inputs 25 to 48. The
outputs have full routing redundancy if there is a second crosspoint is fitted to the host router.
Fig. 1-7: Example ‘Bingo Card’ - Video Wall showing Default Monitoring Mode
Fig. 1-6: MV-831 Default Monitoring Mode
Table 1-4: Multiviewer Inputs for Default Monitoring Mode
Multiviewer Block Input
Mapped to MV-831 Signals
1 to 24
Module Router Outputs 1 to 24
25 to 48
Module Router Inputs 1 to 24
All MV-831
module 24-off router
inputs monitored by multiviewer.
All
MV-831
module’s 24-off router
outputs monitored by multiviewer.
Multiviewer
block
MV-831 Router Outputs 1 to 24
MV-831 Router Inputs 1 to 24
Multiviewer block
inputs 1 to 48
