Belden Grass Valley Kayenne K-Frame, Инструкция по установке и обслуживанию

Страница: 241 / 288

KAYENNE K-FRAME — Installation & Service Manual 241
Control Panel IP Information
Control Panel IP Information
After a panel processor board replacement, the Video Processor Frame IP
address will need to be re-entered into the Control Panel.
Menu Panel IP Information
Replacing a Menu Panel processor will require resetting all Menu Panel IP
addresses. This includes the actual Menu Panel IP addresses, as well as the
addresses the Menu Panel uses to communicate with the Video Processor
Frame and Control Panel (DPOPs).
Video Processor Frame Maintenance
Video Processor Frame NV Memory
K-Frame system non-volatile memory (NV Memory) contains Engineering,
Suite, and User configuration data, and also has data for all the effects reg-
isters. This data is stored as files on the Video Processor Frame Solid State
Drive, and is loaded on bootup. Errors in this data could cause system
problems, which may be overcome, perhaps only temporarily, by clearing
the NV Memory.
Note You should have backup copies of your configuration and EMEM files com-
patible with your current software version so they can be restored after the
NV Memory is cleared.
Clear NV RAM for Control Panel and Frame
Use the following procedure from the Menu Panel or Menu on PC running
the Menu Panel application that operates with the updated Video Pro-
cessor Frame.
Note A new Menu Panel or PC that has not been used with the switcher system will
need to be configured as a Control Surface Node before it can operate with a
switcher system.
1. From the K-Frame Installer menu, touch the
System
button and touch
the device to be cleared.