Belden Grass Valley Kayenne K-Frame, Инструкция по установке и обслуживанию

Страница: 192 / 288

192 KAYENNE K-FRAME — Installation & Service Manual
Section 5 — Basic Configuration
displays controls for either input or output conversion in the right-hand
pane.
Figure 131. SetDef MatchDef Menu, SetDef Selected
SetDef Output Conversion
When SetDef Mode is selected, the Modular I/O buttons report the Mode,
Engineering Name for the input, Suite 1 or 2 (S1 or S2), Output Name,
output format and crop status (Off/On) for the output of the selected pair.
The currently operating video standard is shown in the
Frame Operating Mode
status display on the upper right portion of the menu.
The
SetDef Timing
button, when selected, displays Horizontal and Vertical
Offset data pads, allowing changes to the timing of that output relative the
the system video reference.
The conversion format for the selected output is chosen from the labeled
buttons in the right pane (
1080p-A, 1080p-B, 1080i
,
720p
,
Std Def 4:3
,
Std Def 16:9
).
This format is applied to both output pairs.
Controls for Scale, Letterbox, Pillarbox, H-Center Cut and V-Center Cut are
displayed, depending on the format selected.