Belden Grass Valley Kayenne K-Frame, Инструкция по установке и обслуживанию

Страница: 190 / 288

190 KAYENNE K-FRAME — Installation & Service Manual
Section 5 — Basic Configuration
To use different Panel Prefs for different control surfaces, create and save
each Panel Prefs file while logged into that suite and control surface. This
is necessary for button mappings on each suite’s control panel.
Multi Suite Independent Operation
Once configured with two suites, operators can work on each control
surface completely independently from one another. Coordination will be
required, however, to ensure the resources each operator needs are shared
as necessary.
Operators should also test any EMEMs, RMEMs, or other items created or
saved previously to be sure they work properly with their currently
acquired resources.
Engineering Login
A Kayenne K-Frame system can be configured as two suites, with each
suite having up to two control surfaces. The Eng Login menu is used to
choose which suite and control surface the GV Switcher menu will interact
with and control.
To access a different Suite or Control Surface (CS), go to the
Eng Setup
,
Eng Login
menu and touch the
Change Identity
button. The
Suite
and
CS
buttons
will then be available for selection. After selecting a different button, a
warning message appears. Select
Yes
to make the change, or
No
to cancel the
change and retain the existing menu identity.