Belden Grass Valley Kayenne K-Frame, Инструкция по установке и обслуживанию

Страница: 145 / 288

KAYENNE K-FRAME — Installation & Service Manual 145
Switcher Relay Tally Configuration
Figure 94. On Air Tally Menu, PGM/PST Outputs—Six-Keyer System
Calc On - Turns the delegated Tally Calculator on or off. When on, the Calcu-
lation Enables
button on the separate Relay Assign menu will be activated for
that calculator.
Groups Enabled
- Reports which Tally Groups are currently assigned for that
calculator, by group letter (A, B, C, D, corresponding to Tally/GPI connec-
tors 1-4 on the rear of the Kayenne K-Frame Video Processor). To Enable a
Tally Relay Group, it must first be turned on, using the
Calc On
button for
that calculator.
The first tally calculator name is fixed to On Air . Since the On Air Calculator
is restricted the Look Ahead and Bus buttons are disabled (grayed out).
Creating an On Air Relay Tally Calculator Using MEs or PGM/PST
1. If necessary, login to the desired suite (
Eng Setup
,
Eng Login
).
2. Touch
Eng Setup
,
Switcher Tally
,
On Air Tally
to access the On Air Tally menu.
The Suite button for the current suite will be highlighted.
3. Touch a
Tributary
button on the right.
4. Touch an
ME
or
PGM/PST
button on the left.