Belden Grass Valley Kayenne K-Frame, Инструкция по установке и обслуживанию, Страница: 130 / 288

130 KAYENNE K-FRAME — Installation & Service Manual
Section 5 — Basic Configuration
Figure 87. Remote Aux IP Network Menu
2. Touch an available set of buttons and enter an Aux Panel Name and IP
address of each Aux Panel.
3. Identify the type of Remote Aux Panel (Single or Multi- Destination).
4.
You can assign the component to a suite and control surface now if you
wish, but it is recommended to initially configure your Kayenne K-
Frame system as a single suite. Later, you can modify the configuration
for multi-suite operation.
Remote Aux Panel Configuration
Each Remote Aux Panel needs to be configured, which involves identifying
what Aux Bus(es) it will be able to control, and which sources will be avail-
able on that panel’s button. See
Mapping Logical Remote Aux Panels on
page 199 and Remote Aux Button Mapping on page 200 for more information.
Control Panel Brightness Adjustment
The Control Panel is calibrated at the factory for even brightness and color
balance. Individual panel area illumination levels cannot be adjusted in the
field. However, the relative brightness of button tally, source name dis-
plays, and text displays can be adjusted on a global basis to meet individual