Belden Grass Valley Kayenne K-Frame, Инструкция по установке и обслуживанию

Страница: 123 / 288

KAYENNE K-FRAME — Installation & Service Manual 123
About Network Configuration
3. Under Facility LAN, type in the new IP address (and subnet mask and
gateway if needed). Make sure you enter the correct number exactly. A
typing error can make the frame inaccessible over the network, since
you need to know its IP address for use with the Web browser.
4. Click on the
Save New Settings
button.
5.
Reset the device.
The device will boot up with the new IP address.
When a Video Processor Frame IP address has been changed, communica-
tions will no longer occur with any Kayenne K-Frame system devices that
are configured to use the old frame IP address. You will need to go to each
device and change the address they use to communicate with the Video
Processor Frame.
Changing Image Store IP Address
The Image Store IP address can be changed using the Video Processor
Frame web page. See
Set the IPs Using Device Web Pages on page 122
for more
information.
Changing Control Panel IP Addresses
A Kayenne K-Frame Control Panel’s IP address can be changed using
various methods:
• K-Frame Switcher Installer program (see Setting IPs with the K-Frame
Switcher Installer Program on page 118 ).
• the Kayenne K-Frame Control Panel webpage (see Set the IPs Using
Device Web Pages on page 122 ), or
• the Grass Valley NetConfig application.
Changing Menu Panel IP Address
Set the Kayenne K-Frame Menu Panel IP addresses using the Windows XP
interface. You may use the touch screen to access the Windows settings but
you will need to use a mouse and keyboard connected to the Menu Panel
for entering the IP address values. To set the Menu Panel address:
1.
Go to
Eng Setup
,
Status
and touch the
Minimize Menu
button. This will take
you to the Windows desktop.
2.
Go to
Start
,
Settings
,
Network Connection, Local Area Connection, Properties,
and
follow the standard Windows IP address setting procedure.