28
Installation
Card Interfaces
KXA-FR7 frame model
KXA-FR7-B frame model
Card Interfaces
The following sections describe each card’s user interface such as the meaning of LED
indicators and the use of push buttons. All other adjustment, alignment and configuration
of these cards is made through external controllers (for example, a PC running XEdit
software), and are documented in their respective manuals.
The card’s ejector is color-coded and the card is to be used only in the corresponding frame
slots with the same color. See
Slot Color Coding by Card Type
, on page 27. To make
connections to these cards, see
Signal Connections to the Multiviewer
KXO-Dual Output Card Overview
The KXO-Dual and KXO-Dual3 cards are output cards that can be installed in a Kaleido-X
multiviewer. They are dual-head output cards as they support two independent outputs.
These outputs, called
Head 1
and
Head 2
, are each provided with a complete set of
connectors.
Frame
cooling fans
Rear
connector
panel
AC power
sockets
Frame
cooling fans
Rear
connector
panel
AC power
sockets
Содержание Grass Valley Kaleido-X
