89
Kaleido-Modular-X
Hardware Description & Installation Manual
FlexBridge Inputs/Outputs
The KMX-3901-IN IP cards support 2 FlexBridge inputs, and 2 FlexBridge outputs.
Control
The KMX-3901-IN-IP cards support one external reference input for system genlock.
The KMX-3901-IN-IP cards support one unbalanced LTC input for clock synchronization, or
for monitoring a time code source from a timer, VTR, etc.
Electrical
FlexBridge inputs and outputs
Signal
SMPTE ST 424 (2.97, 2.97/1.001 Gbps)
Formats
Proprietary
Audio
SMPTE ST 299
Return loss
> 15 dB up to 1.5 GHz
> 10 dB up to 3 GHz
Alignment jitter (100 kHz) < 0.3 UI
Timing jitter (10 Hz)
< 2 UI
Cable length between
two input cards
10 m (33 ft) (Belden 1694A)
6 m (20 ft) (Belden 1855A)
Cable length from input
card to output card
50 m (164 ft) (Belden 1694A)
35 m (115 ft) (Belden 1855A)
Connector
DIN 1.0/2.3
Reference Input
Supported formats
SMPTE ST 170 / SMPTE ST 318 / ITU 624-4 black burst
Connector
DIN 1.0/2.3
LTC Inputs
Signal
SMPTE ST 309-1999, SMPTE ST 12-1995 (EBU-3097-E)
Level
500 mVp-p to 10 Vp-p
Impedance
>12 kΩ
Refresh rate
50/59.94 Hz
Connector
DIN 1.0/2.3
Power consumption
60 W
