Belden grass valley KALEIDO-IP VM, Быстрый старт

Страница: 21 / 28

19
Kaleido-IP VM
Quick Start Guide
8 On the File menu, click Save . Alternatively, click the Save button on the toolbar.
Changes to the system are saved.
Adding Stream Sources
If you are configuring a four-port, or a six-port Kaleido-IP VM model, or you wish to monitor
sources from Unicast streams or from other types of transport streams, or more sources
from Multicast streams, then you need to add transport streams to the basic system
configuration. See
Adding a Multicast Transport Stream below, and Adding a Unicast
Transport Stream , on page 21.
Refer to Managing Transport Streams in a Kaleido-IP System Representation , in the Kaleido-X
User’s Manual, for instructions on:
• importing transport stream configuration information, from a spreadsheet
• adding source-specific or source-filtered multicast (SSM or SFM) transport streams
• adding HLS playlists
• adding RTSP transport streams
• adding RTMP transport streams
• adding NMOS devices
Adding a Multicast Transport Stream
To add a multicast transport stream
1 In the main window, click the System tab, and then click Description/Calibrations on
the second level tab bar.
2 Expand the System hierarchical list, right-click the appropriate network adapter for the
source you wish to add, and then click insert Multicast .
The Multicast Stream Configuration window appears.
3 In Multicast Stream Configuration , replace the default stream name if desired, select
the appropriate protocol (RTP, UDP), and type the multicast group address and port
number associated with the transport stream you wish to add.