11
Kaleido-IP VM
Quick Start Guide
To start using the Kaleido-RCP2 with its default settings
1 On the Kaleido-RCP2 unit, press the ENTER button and hold it until the ESC button
lights up.
The following message appears on the LCD display:
Configuration
ROOM SELECTION
2 Press ENTER again to obtain the room list from the multiviewers that are currently
available on the network.
The message
ROOM Select
followed by the name of the first room available appears on
the LCD display.
3 Press the
2
key (to move up in the list) or the
8
key (to move down the list) until the
name of the room you wish to access is displayed.
4 Press ENTER, and then press ESC to exit the configuration menu.
5 Press the LOGIN button.
The following message appears on the LCD display:
LOGIN Position
Admin
6 Press ENTER to log on to your system as
Admin.
A message prompting you for a password appears on the LCD display.
7 Press ENTER again (by default, there is no password).
The message
Access granted
will appear on the LCD display if the login is successful. If
a mouse is connected to the Kaleido-RCP2, then you should be able to see and move
the mouse pointer on the monitor wall.
Step 4: XEdit Installation
XEdit is a client application used to create layouts for the monitor wall, and to configure
your multiviewer system, from your PC or laptop. When the computer with XEdit is
connected to the multiviewer through a TCP/IP network, you can use XEdit to modify
layouts and settings directly on the multiviewer, or you can work locally on the computer
and then export your changes to the multiviewer.
To install XEdit from your multiviewer’s home page
1 From a workstation on the same subnet as the multiviewer, open a Web browser
window and type the multiviewer’s IP address in the address bar.
The multiviewer’s home page appears.
Содержание grass valley KALEIDO-IP VM
Страница 27: ......
