17
iTX Playout Appliance 2
Installation and Service Manual
• Enable
Turn on network discovery
.
• Disable
Password protected sharing
. (Workgroup only)
11 Disable Action notifications.
a Use the Windows
Start
menu to open the Windows
Control Panel
.
b Select
System and Security
>
Action Center
>
Change Action Center Settings
.
c In the
Security Messages
section, uncheck the following options:
• User Account Control
• SmartScreen (Windows® Server 2012 R2 only)
d In the
Maintenance Messages
section, uncheck the following options:
e Click
OK
.
12 Disable automatic updates.
a Use the Windows
Start
menu to open the Windows
Control Panel
.
b Select
System and Security
>
Windows Update
.
c Click
Change Settings
.
d In the
Important Updates
section, select
Never check for updates
from the drop-
down list.
e Click
OK
.
Configuring iTX (GVSP-3T-WIN-2IO and GVSP-3TB-WIN-2+2IO)
GVSP-3T-WIN-2IO and GVSP-3TB-WIN-2+2IO models are shipped with the required iTX
software modules already installed, including Output Server 1.
As part of a first-time installation, some iTX components may need to be configured in
order to integrate with the overall iTX system.
You will also need to add and configure the iTX channel(s) using Output Server 1. The
number of playout channels depends upon the model of iTX Playout Appliance 2, since
GVSP-3TB-WIN-2IO provides only a single SD/HD output channel, while the GVSP-3TB-WIN-
2+2IO provides dual SD/HD channel output.
To integrate the iTX Playout Appliance 2 into an iTX system and add playout channels:
Windows® Server 2012 R2
Windows® Server 2008 R2
Automatic Maintenance
Check for updates
Drive Status
Device Software
HomeGroup
Storage Spaces
Note:
Output Server 2 can be installed and configured on the GVSP-3T-WIN-
2IO and GVSP-3TB-WIN-2+2IO models. Please refer to the Output Server 2
Channel Configuration Guide for guidelines and instructions for further
information and instructions.