26
Using Fully Automated Mode
Adding a master control secondary event to a schedule
Since there are no properties specific to master control primary events listed on the Event
Editor, we ask that you refer to the
iTX Desktop Operator Manual
for full descriptions and
instructions on setting these event properties.
Adding a master control secondary event to a schedule
Master control secondary events represent logos, voice-overs or Macro recalls that are
native to the Imagestore 750.
Master control secondary events can be associated with any type primary event in the
schedule, however their main function is to provide logo and voice-over insertion on the
live video content coming from master control primary events.
To add a master control secondary event to an iTX schedule:
1 Select the
iTX_MC Secondary
tab in the Content Selector to display the Master Control
Secondary Event Palette.
2 In the
Secondary Type
field, use the up/down control to select either
Logo
,
Macro
or
VO
.
3 The following screen captures demonstrate that the palette’s fields change depending
upon the
Secondary Type
selected. As such, please complete the appropriate fields.
Note: Sources cannot be changed within in a scheduled master
control primary event.
