Belden Grass Valley IPVU, Руководство по установке, Страница: 56 / 98

56
IPVU Commissioning and Configuration
Time Sync Configuration
Time Sync Configuration
The Time Sync Configuration page allows selection of the source to be used for
synchronizing flows, and configuration of any properties associated with the relevant
source.
Fig. 4-5: Time Sync Configuration Page
Domain R uses domains to partition a network; only nodes on the
same domain can communicate with one another. A domain is
uniquely identified with a number and a friendly name/alias.
Set an ID as required, then press
Take to confirm the change.
Interface Configuration Displays the IP address for each of the Ethernet interfaces.
Ethernet 1 represents the IPVU’s MEDIA 1 connection, Ethernet
2 represents the IPVU’s MEDIA 2 connection, and Ethernet Gb
represents the IPVU’s MANAGEMENT connection. See Electrical
Connections, Reset Pushbutton, and Status Indicators , on
page 29.
Card Firmware/Software
Version Each software version contains multiple firmware images. These
allow different spigot input/output and flow standard
combinations to be selected.
Select the required software from the
Software Version pane, then
select the firmware which provides the required combination of
inputs, outputs and flow standards from the list displayed on the
Firmware pane. Note : Restore and Restart buttons are displayed
only when an item not currently installed is selected.
Click
Take to restart the IPVU and implement any changes made.
Option Operation