Belden Grass Valley GV Korona, Руководство пользователя

Страница: 412 / 433

412
Advanced Operations
Adding a New Audio Element with Build Edit
With the Video Thumbnail Viewer selected, you can test the composite elements using
the motion control buttons.
Make the Sub-Clip
Select the Make Clip button.
Enter the name of the new clip and select Enter .
The new clip is created and appears in the clip lists in the ClipStore menus.
Adding a New Audio Element with Build Edit
If you require audio before or after video, a video track (for example of black) is needed so a
mark can be made (this can be added with Join Edit, see Join Edit on page 484).
In this case, use the Video and Key of the loaded Video track but add/replace the Audio
track and make a sub-clip. The Use Key From Video button is enabled (highlighted green):
Add an Audio Element
In the Video area:
1 Unless the desired clip is loaded, select the Video Thumbnail Viewer .
2 Select the Change Clip button for the Video area (top) and select the desired clip.
Note: If Multiple sub-clips are desired from a built clip, use Build Edit to
make the whole clip and then use the Cut Edit to make multiple sub-clips.