Belden Grass Valley GV Korona, Руководство пользователя

Страница: 387 / 433

387
Kayenne/Karrera/GV Korona
User Manual
2 Select the Audio Enable button to turn it on (highlights green).
3 Select an Image Store channel (IS 1 through IS 10 ) or the All button and select Output
Audio Group 1 , 2 , 3 , or 4 .
Result: Four channels of recorded audio from the selected group are streamed with the
Image Store video.
Record Image Store Movies with Audio
Any of the four Image Store Input Audio Groups (four audio channels with two stereo pairs,
per group) can be recorded with Image Store movies.
Prerequisite: Image Store audio output groups are configured and enabled, see Configure
Image Store Audio Outputs , on page 386.
1 Select Image Store , Images , Movie Record tab in the menu.
2 Select the Input Source button and choose a source with audio.
3 Select the Audio Group button and select one of the four groups containing the audio
you wish to record with video; select the Audio Group button again to close the Audio
Group window.
4 Select the Record Elements button and enable the Audio button; select the Record
Elements button again to close the Record Elements window.
5 Select the Show E-E button: the button changes to Record .
6 Select Record .
7 To stop the recording, select Record again.
8 Select Keep if you are satisfied with the recording, then name the file in the pop-up
keypad and select Enter .
Result: Image Store movies with audio will have an “A” on the thumbnail in the Image Store,
Images, Movies menu: V-K-A (Video/Key/Audio).
Set the Image Store Movie Audio Offset
Image Store Movie audio can be offset from the video. The offset is limited by the length of
the movie before editing; video and audio are the same length when recorded in Image
Store. A negative offset means the audio begins before the video and a positive offset
means the audio starts after the video.
Prerequisite: Image Store audio output groups are configured and enabled; see Configure
Image Store Audio Outputs , on page 386.
1 Select Image Store , Images , Movies tab in the menu.
2 Select an Image Store movie recorded with audio; the Offset data pad will be displayed
on the far right of the menu.
Note: The Audio Enable button must be on for any Image Store channel
to pass audio with video.