Belden Grass Valley GV Korona, Руководство пользователя

Страница: 380 / 433

380
Advanced Operations
Offset an Image Store Key/Cut Signal with Build Edit
Offset an Image Store Key/Cut Signal with Build Edit
A negative offset sets the Key/Cut signal to start before the Video/Fill; if the key is shorter
than the video, the last frame will record as a still to the end of the movie. A Positive offset
sets the key signal to start after the Video/Fill and records a still of the first frame of the key
until the key starts.
Image Store Key/Cut Offset
Prerequisite: Image Store audio output groups are configured and enabled (see the K-
Frame User Manual for your switcher model for more information).
1 Select Image Store , Images , Movie Edit tab in the menu.
2 Select the Key/Cut element movie and assign an Image Store channel by selecting it
(right).
3 Enter the offset value in the Key Offset data pad (a negative (-) value means the audio is
set to begin before the video):
a Turn the Menu Panel soft knob to select a value or,
b Select the Key Offset data pad, enter a value in the pop-up keypad, and select
Enter.
Build a Movie Using Audio and Video/Key from Different Movies
Audio from an Image Store channel can be paired with the video/key in the Video/Fill
channel (or Video/Fill and Key/Cut elements) to create a new movie using the Build Edit
feature.
1 In the Image Store, Images, Movie Edit menu, select Build as the Edit Type.
2 Select the Audio element movie and assign an Image Store channel by selecting it
(right).
3 If desired, select the Change Movie button to select a different movie.
4 Repeat as necessary for the Video/Fill and Key/Cut movies.
5 Turn off the Audio from Video button in the Audio element area.
Result: The audio from the Audio element channel is paired with the video from the
Video/Fill channel.
6 Position the movie for each element at the first synchronized frame.