Belden Grass Valley GV Korona, Руководство пользователя

Страница: 270 / 433

270
Advanced Operations
Deleting a Keyframe
1 Review the recorded material and determine the times that keyframes are needed. In
this example, keyframes are needed at 1.5 seconds, 2.5 seconds, and 3 seconds.
2 Bring up an empty register ( LRN , • ), set up the look for the first keyframe and then press
either <Ins (Insert Before), >Ins (Insert After) or Mod to add that keyframe to start the
effect.
3 Press GoTM , 1 , • , 15 , ENT to move the cursor one and a half seconds into the effect, set
up the second keyframe and add it to the effect.
4 Press GoTM , 2 , • , 15 , ENT , set up the third keyframe and add it.
5 Press GoTM , 3 , • , ENT , set up the last keyframe and add it.
The effect will now exactly match the recorded material. Using E-MEM, you can run the
effect and the recording simultaneously (see
About E-MEM Control of External Devices , on
page 229).
Deleting a Keyframe
In the menu, when the edit cursor is on a keyframe, pressing Delete removes that keyframe
from the effect. The Delete button is inactive when the edit cursor is on the path.
Delete behavior is affected by Constant Duration mode. When Constant Duration is OFF,
the duration of the deleted keyframe is also removed from the effect (time to the next
keyframe). When Constant Duration is ON, the duration of the previous keyframe is
increased by the deleted keyframe’s duration, so the total duration of the effect is
unchanged. After a delete operation, any keyframes following the deleted keyframe are
renumbered accordingly.
Delete Keyframe