Belden Grass Valley GV Korona, Руководство пользователя

Страница: 265 / 433

265
Kayenne/Karrera/GV Korona
User Manual
About Input Selection
When a video/key source is selected, you choose to control either the video input or the key
input with the Video and Key buttons.
About the Setup Selector
The Setup buttons are used to select the desired set of controls from the setups defined for
that channel. The menu displays asterisks for setups that have no parameters assigned.
Newton Channel Information
Channel – The number of the GV Switcher input BNC used to select the current Newton
channel is displayed.
Setup Name – The currently selected setup (1-5) is displayed in this pane.
Additional information for the currently selected channel is displayed below.
If multiple modules are daisy chained together in a Newton channel, the information
displayed will be for the module with a parameter assigned to the top knob.
About Newton Controls
On the right side of the menu the active control functions are identified. Direct knob
control and data pad numeric entry are available. The menu displays asterisks for
unconfigured controls. The status of the function for each control is also reported, with
green indicating a connection exists and the data is valid, and red indicating no connection.
Accelerate Knobs – Selecting this button accelerates knob adjustments by a factor of 10,
providing coarse and fine knob control.
Refer to the separate Newton Instruction Manual for specific information about Newton
controls.