Belden Grass Valley GV Korona, Руководство пользователя

Страница: 244 / 433

244
Device Control
About Q-MEMs
The DCM supports multiple gangs, so there may be a gang associated with the device on
the
A button, and another gang on the device associated with the B button, and so on.
When the Gang button is high-tallied green, then there is an active gang associated with
the selected letter button. To temporarily disable the gang, press the
Gang button; it will
low tally green, then make an adjustment. Pressing Gang again, will re-enable the gang. For
example, this can be used where one device is video and the other key. By pressing the
Gang button you can turn off the gang temporarily, jog the key channel to more precisely
align it with the fill, and then re-enable the gang.
Panel Gangs
The “Panel Gang” (Local Aux Bus gang) and the gang on the ‘F’ button are the same when
the
SDEL button is selected. Gang selections made from the DCM in this way also affect
gang selections made in the Local Aux Bus Module and vice versa.
About Q-MEMs
Q-MEM can be used to assign a device to a letter button on the DCM, load a named clip on
that device and cue to its mark-in point, and optionally play or loop the clip. Multiple
devices can also be loaded and cued using the “Link Cue” feature.
Each suite has 1000 cue memory registers (Q-MEMs).
Each cue has:
• Up to 38 devices with associated device state data (device state),
• Up to 6 device associations with Device Control buttons A - F,
• Selection of radio buttons A - F (or none) (device selection), and
• One play flag.
For each device, the following device state data is learned into the cue:
• Clip name,
• Mark-In point for clip,
• Mark-out point (may be empty),
• Loop flag,
• Gang flag, and
• A list of ganged devices.
Recalling a cue register can be used to:
• Associate devices with the lettered buttons only, so you can set up your DCM for
manual use,
• Recall and cue devices without affecting the current letter button selections, and
• Both associate the devices with letter buttons and load, cue, and play them.