Belden Grass Valley GV Korona, Руководство пользователя

Страница: 226 / 433

226
Device Control
Control an External Device Using Timeline Events and E-MEM
3 Select the Load button on the right.
4 Select the Cue button to enter the timecode:
• If you want to play the clip from its starting point, it will automatically cue to this
location when loaded.
• If you do not want to play the clip from its starting point, either cue the device to the
desired location or enter the timecode value manually.
Control an External Device Using Timeline Events and E-MEM
1 Set up the Control Panel to the desired state, making sure the DDR source is not
selected on the PGM PST A bus.
2 Learn this state to an E-MEM register as the first keyframe of the effect.
3 Go to a point later in your effect giving sufficient time for the clip to load and cue. For
example, go to three seconds by pressing GoTm , 3 , • , ENT .
4 Select the Clear Events button in the Events pane to deselect the old commands. This
helps prevents accidental multiple load and cue commands in the same effect.
5 Select the Play button on the Timeline Events menu.
6 Set up your control panel to the desired state, including selecting the DDR on the PGM-
PST A bus.
7 Press <Insert or >Insert to add the keyframe information to the E-MEM register.