Belden Grass Valley GV Korona, Руководство пользователя

Страница: 115 / 433

115
Kayenne/Karrera/GV Korona
User Manual
1 Select ME , Mode to access the Mode menu.
2 Select the ME button (far left) of the M/E you wish to split for Secondary iDPM Global
channel assignment.
3 Select the Split button in the pane second from the left.
4 Select the keys you wish to assign to the Secondary Global Channel in the Secondary
Assign pane.
5 Repeat Steps 2-4 for each M/E you wish to split and assign keyers to the Secondary
Partition.
6 Select iDPM , Transform .
7 Activate the keyers assigned to the Secondary Partition by selecting the assigned M/E
keyer button and selecting the Global toggle button to highlight it.
The ME keyer button displays SEC Glb to signify the keyers Secondary Global
assignment.
Adjust iDPM/2D DPM Border Edges
Adjust the border edges together:
1 Select iDPM, Keyers iDPM or Keyers 2DPM , Border .
2 Select an ME/Keyer data pad on the left side of the menu (or use the Multi select button
for multiple keyers).
3 Turn on DPM Borders by selecting either the Square Border or Round Border button in
the Border Enable menu pane.
4 Select a path type by selecting the S-Linear , Linear , or Curve data pads in the Border
menu pane.
a If Curve is selected, the Tension, Continuity, and Bias can be adjusted using the soft
knobs or pop-up keypads.
5 Select the Width or Softness data pads and use the Size or Softness soft knobs or pop-
up keypads to adjust those values.
iDPM/2D DPM Border Color
Adjust the border color by selecting the Border Color Adjust data pad (the color value is
displayed in the data pad) and then turning the Border Hue, Border Saturation, or Border
Brightness soft knobs or using the pop-up keypads to adjust those values.
Adjust iDPM/2D DPM Border Edges
The width and softness of DPM Borders can be adjusted for each edge independently,
using the soft knobs or pop-up keypads.
1 Select iDPM, Borders.
Note: DPMs selected for borders using the Multi select button will each
have the same border values.
Note: Color is applied to the entire border, there is no independent control.