Belden GRASS VALLEY DENSITE 3+ FR4, Руководство пользователя, Страница: 51 / 59

39
Densité 3+ FR4
User Manual
Factory Settings
The frame reference maintains a set of factory-installed settings, to which it can be restored
at any time.
To restore the factory default settings
1 Click the Load Factory button at the bottom of the service panel.
2 Click OK in the pop-up confirmation window to perform the factory restore, or Cancel
to leave the settings unchanged.
Advanced...
Shows the LongID for this device. The LongID is the address of
this frame reference in the iControl network.
Remote System
Administration Opens the Joining Locators window, which lists remote lookup
services to which this frame reference is registered.
To add additional services
1 Click Add
2 Enter the IP address of a server running a Jini look-up
service, using this syntax:
jini://<ip_address>
3 Click OK to add the service, or Cancel to discard the
information.
To remove an existing service
1 Click a service in the Joining Locators window to select it.
2 Click Remove.
3 Click OK in the pop-up confirmation window to remove the
service, or Cancel to leave it in place.
Button