RETURN OF EQUIPMENT
No equipment may be returned without purchaser first obtaining written Return Material Authorization (RMA)
from GarrettCom. An RMA can be obtained by contacting Sales at 510-438-9071.
Equipment accepted for credit, not involving a GarrettCom error, shall be subject to all the terms of the original
purchase contract and to a service charge. Returned equipment must be of current manufacture, unused, and in
reasonable condition, securely packed to reach GarrettCom without damage, shipped F.O.B. GarrettCom facility
with transportation charges paid, and labeled with Return Material Authorization (RMA) number. Any cost
incurred by GarrettCom to put equipment in first class condition will be charged to purchaser.
COMPLIANCE NOTICES:
FCC Part 15
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his/her own expense.
In order to maintain compliance with FCC regulations shielded cables must be used for electrical I/O with this
equipment. Operation with non-approved equipment or unshielded cables may result in interference to radio and
television reception. Changes or modifications could void the user’s authority to operate the equipment. The user is
cautioned not to change or modify this product.
FCC Part 68
This device complies with part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this
equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX.
If requested, this number must be provided to the telephone company.
Note:
REN (Ringer Equivalence Number) does not apply to this equipment.
IC CS03 (Industry Canada)
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in
the interference-causing equipment entitled “Digital Apparatus”, ICES-003 of the department of Communications
(Cet appareil numérique respecte les limites bruits radioélectriques applicables aux appareils numériques de Class
A prescrites dans la norme sur le materiel brouilleur: “Appareils Numériques”, NMB-003 édictée par le ministre des
Communications).
This product meets the applicable Industry Canada technical specifications/Le présent materiel est conforme aux
specifications techniques applicables d’Industrie Canada.
EN55032
Warning: This is a Class A product. In a domestic environment this product may cause radio interference, in which
case the user may be required to take adequate measures.
