Belden 942999831, Руководство пользователя

Страница: 37 / 79

Installation MTS2600/2700/2800
Release 01 12/2021 37
1.6 Display elements
After the supply voltage is set up, the software starts and initializes the device.
Afterwards, the device performs a self-test. During this process, various LEDs
light up.
1.6.1 Device status
These LEDs provide information about the conditions which affect the
operation of the whole device.
Indicator type
Indicator
name
Indicator
color
Status
System status
LED
SYS Green
Quick flashing (flashing 5 times per second): indicating
hardware starts to work after power on
Slow flashing (
flashing 1 time per 2 seconds
):
indicating the system is working normally
OFF: indicating an exception to the system running.
Power light PWR Green
ON: indicating all in-place power modules are working
normally
OFF: indicating an exception to the in-place power
modules
Fan indicator FAN Green
ON: indicating all fan modules on the equipment are
working normally
OFF: indicating an exception to at least one fan module
on the equipment
STACK indicator STACK Green
Flashing: indicating stacking function is enabled, and
the equipment is the main unit of the stacking system
ON: indicating stacking function is enabled, and the
equipment is not the main unit of the stacking system
OFF: indicating stacking function is not enabled
ID indicator ID Blue
Quick flashing (flashing 5 times per second): used for
site positioning, and for the operation and maintenance
personnel to remotely control the ID light on and off
OFF: indicating ID light is not enabled by default